Eye Wash Stations Plumbed and Portable

Plumbed Emergency Showers and Eyewash Stations

Studies have shown that despite the 15-minute flushing requirement, users usually flush exposed body parts five minutes or less. The reasons were always related to the extreme discomfort users experienced using cold water. In cold climates the water temperature in indoor plumbed systems can be in the 2-7°C (35-45°F) range.

Also, drinkable tap water may not provide the best flushing solution. Tap water may contain many contaminants and could aggravate the injured body part. Some municipal water supplies also contain chlorine which can irritate and leach salt from the eye tissue. As well, tap water may contain rust, scale and chemicals. Running the water continually keeps the water line fresh. Plumbed emergency eyewash stations should use water that is periodically tested and treated to remove chemical contaminants.

Portable, Self-Contained Eyewash Stations

Portable, self-contained eyewash stations have a limited amount of fluid. As a result, maintenance is critical to ensure that units are fully charged at all times.

These eyewash stations also require ongoing maintenance of the buffered saline solution. The agents used to control bacterial growth are effective for certain limited periods of time. Also, small amoebae capable of causing serious eye infections have been found in portable and stationary eyewash stations. Consequently it is important to monitor the shelf life of the solution and replace the solution when it has expired.

Eye and Skin Flush

Eyewash Skin Wash Products contain a preserved, buffered, saline solution that is sterile. Personal eyewash devices are intended to supplement, not replace, eyewash units. Personal products may also be used for continued irrigation when moving an injured person.

For questions contact us at 866-362-2691 or www.myfirstaidcompany.com or sales@myfirstaidcompany.com